The excellent properties displayed by the parts manufactured with EBM allow polishing of the parts to a mirror or optical finish for use in dies and other applications requiring a superior surface finish. CHEMICAL COMPOSITION Arcam ASTM F75* ASTM F75 Required chromium, cr 28,5% 2730% molybdenum, mo 6% 57% nickel, ni 0,25% <0,5%
Cobalt Alloy 6b / Stellite 6b (AMS 5894)Stellite 6b is supplied in the solution treated condition (to AMS 5894) and its wear resistant properties inherent in this state limit the amount of heat treating and post machining. Typical applications for Alloy 6b include chain saw guide blades, furnace fan blades, high temperature bearings, valve stems, food processing equipment and steel
8.9 g/cm3:Solubility in H2O:N/A:Electrical Resistivity:6.24 microhm-cm @ 20 °C:Electronegativity:1.8 Paulings:Heat of Fusion:3.64 Cal/gm mole:Heat of Vaporization:93 K-cal/gm atom at 2870 °C:Poisson's Ratio:0.31:Specific Heat:0.109 Cal/g/K @ 25 °C:Tensile Strength:N/A:Thermal Conductivity:1.0 W/cm/K @ 298.2 K:Thermal Expansion (25 °C) 13.0
FusionStellTM Cladding - Refining CommunityStellite with full density onto metal substrates The coating offers the wear resistance of a cast cobalt component on a non-cobalt substrate, typically steel Properties of the FusionStell coating the same as cast alloy Chemical composition identical Hardness the same Finish the same as equivalent cast alloys
Jul 08, 2015 · For comparison purposes, the thermal conductivity in SI units of watts per meter kelvin(W/m·K) for copper is 385; for 316L, 14-15.9; and for Stellite 12, 14.6. Since the thermal conductivity is very low for both Stellite 12 and 316L stainless steel, the deposited layer chills and cools down slowly without any fusion onto the parent material.
Stainless Steel - Grade 410 (UNS S41000)
Topics CoveredIntroductionKey PropertiesCompositionMechanical PropertiesPhysical PropertiesGrade Specification ComparisonPossible Alternative GradesCorrosion ResistanceHeat ResistanceHeat TreatmentWeldingMachiningApplicationsCobalt Base Hardfacing Alloys Polymet CorporationCharacteristics and Composition. Metal Cored PolyStel 12 is a cobalt-based metal cored wire. PolyStel 12 is equivalent in nominal chemical composition, physical properties, and performance properties to the Stellite brand. PolyStel 12 cored wire meets AWS A5.21 ERCCoCr-B. It is considered an intermediate between PolyStel 6 and PolyStel 1.
Stellite 6 Steel Chemical composition, Metal Properties Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. Stellite 6 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-80247006 E-mail:[email protected]
Tool & Die Steels Inc. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. Stellite 6PM can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-80247006
Stellite Family:StelliteThe Stellite alloys are mostly cobalt based with additions of Cr, C, W, and/or Mo. They are resistant to cavitation, corrosion, erosion, abrasion, and galling. The lower carbon alloys are generally recommended for cavitation, sliding wear, or moderate galling. The higher carbon alloys are usually selected for abrasion, severe galling, or low- angle erosion.
USA / SAE, High carbon steels, high alloyed ::Total MateriaThe Total Materia database includes more than 450,000 grades from all over the world. Their chemical compositions, mechanical and physical properties, cross-references, and more are only a click away. Finding a grade in the database is very easy and takes seconds. For example, lets look into the properties of steel grade X5CrNiMo 17 12 2 according to DIN.
Stellite 6B and Stellite 6K are wrought materials whose physical properties are enhanced as the grain structure of the metal changes during plastic deformation. During this forming process, the wrought material achieves higher strength than cast material of the same chemistry.Stellite Alloys - Chemical Composition, Mechanical
Topics CoveredIntroduction to Stellite AlloysTypical Chemical Properties of Stellite AlloysManufacturing Processes of Stellite AlloysStellite Alloy ApplicationsReferencesWhat is Stellite Alloy?Stellite Alloys - Chemical Composition, Mechanical Properties and