The following table shows the chemical composition of AISI 4042 alloy steel. Element. Content (%) Iron, Fe. 97.93-98.55. Manganese, Mn. 0.70-0.90. Carbon, C. 0.40-0.45.
AISI 4042 Round bars, Forgings, Plates Suppliers - Nextgen We at Nextgen Steel & Alloys is an well-known & one of the most prominent stockist, supplier, exporter & manufacturers of AISI 4042 material in forms of Round Bars, Hex Bars, Square Bars, Forgings, etc. We offer best quality of material in compliance with industry norms.
AISI 4042 Steel. Categories:Metal; Ferrous Metal; Alloy Steel; AISI 4000 Series Steel; Low Alloy Steel; Carbon Steel; Medium Carbon Steel. Material Notes:Oil quenched. Forging temp.:1230 °C (2250°F) max. Annealing temp.:830°C - 925°C (max. hardness 183 HB). Normalizing temp.:855 - 955°C (approx. hardness 235 HB).
ASTM SAE AISI 1045 Carbon Steel Heat - World MaterialSAE AISI 1045 Steel. ASTM SAE AISI 1045 steel is one of the commonly used medium carbon steels with an average carbon content of 0.45%, medium tensile properties, good strength, toughness and wear resistance. It can be treated by annealing, flame treatment or induction hardening. C1045 is also known as 1045 cold rolled steel (cold worked), and 1045 hot rolled steel is known as 1045 HR.
ASTM, SAE and ISO Grade Markings for Steel Fasteners Download a complimentary PDF of our Fastener Markings chart. Contact American Fastener with any questions or for a custom quote. Identification Grade Mark Specification Fastener Description Material Nominal Size Range (in.) Mechanical Properties Proof Load(psi) Yield Strength Min (psi) Tensile Strength Min (psi) NoGradeMark SAE J429 Grade 1 Bolts, Screws, Studs Low or Medium Carbon 
SAE J995 - Mechanical and Material Requirements for Steel Nuts Purpose:This specification covers the mechanical and material requirements for inch-series steel nuts. This standard provides the requirements associated with the SAE "grade" designations i.e. "SAE grade 5" Criteria:Specify standard name, desired grade Usage:
Material Category Search - MatWebSelect Material Name; 1:Overview of materials for AISI 4000 Series Steel:2:AISI 4012 Steel:3:AISI 4023 Steel, normalized at 925°C (1700°F), machined to 25 mm (1 in.) rounds, pseudocarburized at 925°C (1700°F), box cooled to RT, reheated to 775°C (1430°F) and oil quenched, 150°C (300°F) temper
SAE 1030 - Equivalent MaterialsMedium Carbon Steel. Structural Steel. Equivalent Materials to SAE 1030. Download equivalents as an Excel file Some equivalent materials may be stricter whereas others may be outside the bounds of the original material in selected parameters. ASTM A1020 Grade C.
UNS Number G4 AISI and SAE Carbon and Alloy Steel. UNS No:Description:Brand/Trp:ASTM Equivalent: (4042), ASTM A519 (4042) UNS G40470:Mo Alloy Steel:ASTM A29 (4047), ASTM A321 (4047), ASTM A331 (4047), ASTM A519 (4047) UNS G40630: Nickel Alloy Grades Comparison Material Grade Chart Carbon Steel Structural Steel Comparison Chart
Welded Low-Carbon Steel Tubing - SAE InternationalThe SAE J526 Standard covers electric-resistance welded single-wall low-carbon steel pressure tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a quality suitable for bending, flaring, beading, forming, and brazing. Material produced
Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing J2467_200802. The SAE Standard covers normalized electric resistance welded, cold-drawn, single-wall, SAE 1021 carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, forming, and brazing. The grade of material produced to this specification is higher in carbon content and manganese content than the grade of material specified in SAE
It is commonly called AISI 4042 Molybdenum steel. It is composed of (in weight percentage) 0.40-0.45% Carbon (C), 0.70-0.90% Manganese (Mn), 0.035%(max) Phosphorus (P), 0.04%(max) Sulfur (S), 0.15-0.30% Silicon (Si), 0.20-0.30% Molybdenum (Mo), and the base metal Iron (Fe).SAE 4042 steel - Steel gradesStainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. SAE 4042 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.